![]() ![]() ![]() Afterwards put in the ingredients and press the handle after you see the "will produce" while hovering over the furnace. Make sure to put the fuel in first, then press the activate button. It could also result in lower temperature if that is desired, but you could also use a volume pump with a lower fuel input setting. The optimal gas mix that burns completely is 1 part (33.3%) oxygen to 2 parts (66.6%) volatiles, other mixes would also work but leave you with leftover oxygen or volatiles depending on the percentages used. Output should also be extracted and vented/recycled through a backpressure regulator to keep furnace pressure in check. This can be done by separating gases into tanks using atmospheric units and piping individual gases through a mixer and a Pressure Regulator or a Pipe Volume Pump connected to the furnace input. While smelting steel is easily achieved with ice, other recipes usually require a working piping setup. If the contents of the furnace are ejected without reaching the required temperature and pressure for smelting, they'll come out as Reagent Mix which can be processed in a Centrifuge to recover the raw ores. Ice (Oxite) and Ice (Volatiles) can be manually input directly in the furnace in order to create crude gas mixtures, or to be directly extracted as an easy trick for melting the ice. Used to smelt ingots and alloys using an oxygen/volatile gas mix.
0 Comments
Leave a Reply. |